null
Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]
  • Haltech NEXUS Rebel for LS Gen III Engines [HT-220201]

Haltech NEXUS Rebel for LS Gen III Engines PNP for Infiniti G35

  • WRS-HT-220201-G35

USD $2,395.00

Adding to cart… The item has been added
Built to Order - Most orders ship in 2-8 weeks. Some options may take longer. CALL US if you have a DEADLINE!!!
Haltech Rebel LS Gen III ECU & Harness plus Wiring Specialties PNP Chassis Interface Harness
 
If you’re planning on putting a General Motors LS into your project car, then Haltech's all-new Nexus Rebel LS Engine Management System and terminated wiring harness is perfect for you!  

It's an Engine Management System and Terminated Engine Harness package that provides a very cost-effective and simple solution to get your General Motors LS engine up and running.
 
With the fully integrated Wiring Specialties Chassis Interface Harness, the entire process is Plug-and-Play, giving you dashboard functionality and other Chassis CANBUS functions. 
 
FEATURES
  • ECU designed from the ground up to suit GM's popular LS engine platform
  • Start-up is a breeze thanks to the new LS Set-up Wizard in our NSP software
  • Comes complete with an easy-to-install harness to suit multiple GM LS applications
  • Easy integration with Haltech dashes, PDMs, sensor kits, and accessories
  • Kit Supports Gen III engines with Cable Throttle OR with DBW Electronic Throttle & Pedal for an additional charge.

The Rebel LS comes with dedicated inputs and outputs that don’t require configuration and work as intended right out of the box. Every wire in the harness is labeled and configured in the software so there’s no chance of a setup or configuration problem. There’s simply no need to spend hours working on a pin-out or assigning pins and functionality in the software. Just read the labels on the harness and plug them into the associated device. 

But we know that if you’re putting an LS into your project car there will always be a level of customization, so we’ve included some configurable channels.

• 1x 25amp output
• 5 x digital outputs
• 4 x digital inputs
• 2 x analogue inputs

These are user-configurable and extra to the inputs and outputs required to run the engine.  

KIT INCLUDES
  • HT-220001 - Rebel ECU
  • HT-186500 - Main Harness
  • HT-186504 - Cable Throttle + IAC sub-harness
  • HT-186501- LS EV1 Injector Sub-Harnes
  • HT-187003 - T56 Transmission Harness
  • HT-186123 - 2 Pin Bosch Alternator Harness*
  • HT-186124 - 4 Pin Delco Alternator Harness*
  • HT-186125 - 2 Pin Yazaki Alternator Harness*
  • HT-186508 - Gen III Knock Sensor Adaptor

* Haltech Rebel Alternator sub-harnesses will be in the box but are NOT used with this Wiring Specialties Plug-N-Play setup.

SENSOR PACK
  • Bosch LSU 4.9 Sensor
  • Weld on fitting for O2 Sensor
  • Air Temperature Sensor M14 x 1.5
  • Weld on fitting for Air Temp Sensor

On the transmission side of things, the harness includes the electrical connector for the T56 speed sensor, but you could run any manual gearbox or mechanically shifted automatic transmission like a Powerglide or TH400. We will be adding support for popular electronically controlled transmissions in the future, and they will integrate with the current harness system.

The Rebel LS has a “CAN” communication network that allows communication with all the popular Haltech CAN devices like the iC-7 Dash, 8 and 15 Button Keypads, and the Power Distribution Modules or PD-16s. In fact, you could connect up to 4 PD-16 units and have the entire car including headlights and taillights controlled through the ECU avoiding the need for external fuses and relays.

As for the software, there’s a setup wizard that runs when you first go online with the ECU.

It asks for a little information about your particular setup then it builds the Fuel and Ignition maps, as well as makes setup changes depending on the configuration.

It’ll ask things like which variant of engine you’re using, what’s the compression ratio, what camshaft you are using, what injectors, and which coils. Asking you to let us know which components are in play, so we can build the closest tune file for your combination.

The Rebel LS ECU is equipped with advanced long-term learning which allows it to monitor the Air to Fuel ratio, the ignition table, and knock detection feedback as well as idle quality and continually make adjustments in the background. The longer the engine runs the better the tune-up gets!

You can go online with the Nexus NSP software and make tuning changes just like you’re used to with the rest of the Haltech range, but there is certainly no need to – The setup wizard takes care of it all!

JUST THE FACTS

OUTPUTS  
Ignition 8 x Pre-Configured Outputs
Injector 8 x Pre-Configured Outputs (High Impedance Only)
Low Side Switched / Digital Pulsed Outputs (DPO) 5
25A Outputs 3 x Dedicated (Ignition / Injection, Fuel Pump and Cooling Fan)
1 x User Definable
   
INPUTS  
User Definable Analog Voltage Inputs (AVI) 2
Engine Position Inputs 2 x Dedicated Crank And Cam inputs
User Definable Synchronised Pulsed Inputs (SPI) 4 (Can Be Programmed For AVIs)
Pre Configured Knock Inputs 2
On-board Wideband Controller (LSU 4.9 Only) 1 (Expandable To 10 With Haltech CAN WB Modules)
Ignition Switch Input 1
   
COMMUNICATIONS  
CAN Bus Networks 1 x Dedicated Haltech CAN
High-Speed USB 2.0 (USB-C interface) 1
On-board Wi-Fi YES
   
OTHER  
On-board Data Logging 32MB
On-board MAP Sensor 4Bar (Absolute) / 43.5 PSI Gauge
Oscilloscope 4 Channel
5V Sensor Supply 1
8V Sensor Supply 1
Sensor Ground 1
   
FEATURES  
Easy Set Up Wizard YES
Drive-By-Wire Throttle Support 1
Flex Fuel YES
Closed Loop O2 Control Dual Bank (Requires Additional Sensor / Controller)
Knock Control Dual
Variable Cam Control NO
Auto Trans Control Coming Soon
Long Term Learning YES – 3D
Data Logging Laptop + Onboard
Anti-Lag Rotational Idle YES
Launch Control YES
Traction Control YES
Tuning Table Resolution 32 x 32 – 3D
Engine Protection Multi-Level
CAN Networks 1 (Haltech CAN Only)
Nitrous Control YES
Boost Control 3D Closed Loop
Flat Shift Control YES
Shock Travel & Ride Height YES
Race Timer YES
Driveshaft And Engine RPM Targeting NO

Videos Hide Videos Show Videos

    Related Items

!