S13 KA24DE MAF Sensor Connector

S13 KA24DE MAF Sensor Connector

NOTE:  This MAF connector is shipped with 3 WIRES if you choose PIGTAIL, not 4 as pictured.

Connector is available as:

• Pigtail - Fully assembled with 3 inches of wire. Select this if you want to attach bare wire to bare wire.
  
• Housing - Only the plastic housing parts. Select this if you want to swap over the pinned wires from a damaged housing to a new housing.
  
• Parts - Not assembled, comes with housing, crimp-on wire terminals and wire seals.  Select this if you want to crimp new pins on and then assemble the connector.