S13 Fuel pump Connector FEMALE (Harness side)

S13 Fuel pump connector - located on the Wire harness side of the assembly, in the car.

For pigtails - USE 16 AWG wires.

Connector is available as:

• Pigtail - Fully assembled with 3 inches of wire. Select this if you want to attach bare wire to bare wire.
  
• Housing - Only the plastic housing parts. Select this if you want to swap over the pinned wires from a damaged housing to a new housing.
  
• Parts - Not assembled, comes with housing, crimp-on wire terminals and wire seals.  Select this if you want to crimp new pins on and then assemble the connector.