For use with an Aftermarket ECU like ECU Master, AEM Infinity, Haltech Elite or LINK G4X Series. Please contact sales if you have any questions.
Complete Replacement Chassis Harness & Power Distribution Management Solution for Nissan S13 vehicles includes:
- Complete replacement body wiring harness - finally available!
- Pre-Programmed 15-Circuit Solid-State Power Distribution Management Unit (PDM15)
- Choice of 8-position CAN Keypad OR use your OEM S13 Stalks (for an additional charge, RHD connector must be sent in see picture) to control lights, turn signals, wipers etc.
- Directly Terminated Signal connections based on Chassis - we make this as Plug-N-Play as possible
- Add our Complete Battery Wiring Power Management Kit (for an additional charge) for total peace of mind
This chassis harness is perfect for Race / Track cars, cars running a stripped interior / switch panel, and restoration projects - all using an aftermarket ECU. It was developed in house on actual S13 LHD & RHD Chassis' to ensure a perfect fit to all connections.
NOTE: For all RHD chassis using the OEM Stalks lighting Option, you will need to send in the pictured steering column harness connector to us.
NOTE: This item is NOT ELIGIBLE for coupon discounts. Call Sales!
APPLICATIONS: USDM S13, JDM S13, Euro S13
- Any Nissan 240sx S13, Silvia S13, 180sx or 200sx S13
- Coupe & Hatch Body Styles Supported
- 240sx Convertible NOT supported
- 180sx Type X Hatchback Taillights will need connector adapters
- Pop-up headlight motor operation NOT supported - only lights
Supported Outputs
- Ignition & EFI + Starter
- Dual Engine Cooling Fans controlled via Aftermarket ECU
- Single Fuel Pump, Dual Pump Upgrade Available
- Running Lights, Marker Lights, and License Plate Lights
- Low Beam & High Beam Headlights
- Left & Right Turn Signals (manual, no auto cancel) at All Four Corners + Marker Lights
- Brake Lights
- Single Windshield Wiper Speed - High
- Power Windows - Requires all OEM door modules, switches & harnesses to be in place
- Power Sunroof Upgrade Available
- Single Blower Motor/ HVAC Speed
- Horn
- Hazard Lights
Supported Inputs
- OEM Key Switch Required for Ignition Signal
- Choice of:
- OEM Stalks for Lighting and Wipers (Additional charge, RHD must send in steering column harness connector - see picture above), OEM Key Switch operates starter
- CANbus 8-Button Keypad for all functions
Tech Support Included for our Customers 7 days a week
For the Dual Fuel Pump Option, please click HERE for additional specifications & details.
For the Complete Battery Wiring Power Management Kit Option, please click HERE for additional specifications & details.
PRO-SERIES HARNESS TECHNICAL SPECS
- Point-to-Point continuity tested on every wire
- Constructed using exact OEM connectors and seals
- Made with high temp TXL wire with adhesive shrink tubing (-40°C/-40°F to +125°C/+257°F operating temperature)
- Wrapped in lightweight nylon loom (-94°C/-137°F to +125°C/+257°F operating temperature)
- Fully tested after production for an easy plug-and-play installation
